Home > Hydraulic Fan Motor >

Heavy Equipment Parts E325C , 179-9778 Excavator Fan Motor High Strength

Product Categories

Excavator Hydraulic Pump [724]
Excavator Hydraulic Pump Parts [163]
Travel Motor Assy [513]
Excavator Swing Motor [304]
Swing Gearbox [274]
Excavator Control Valve [118]
Travel Gearbox [255]
Excavator Final Drive Parts [85]
Excavator Center Joint [81]
Hydraulic Gear Pump [125]
Hydraulic Fan Motor [47]
Excavator Spare Parts [1093]
Excavator Controller [127]
Excavator Monitor [60]
Excavator Relief Valve [63]
Excavator Hydraulic Cylinder [52]
Diesel Engine Assembly [25]

GZ Yuexiang Engineering Machinery Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Heavy Equipment Parts E325C , 179-9778 Excavator Fan Motor High Strength

Ask Lasest Price
Brand Name :	Belparts
Model Number :	325C
Price :	Negotiated price
Payment Terms :	Western Union&T/T&Paypal/ pay
Supply Ability :	600 pieces per month
Delivery Time :	2~3 days
MOQ :	1PC

Add to Cart

Product Details
Company Profile

Heavy Equipment Parts E325C , 179-9778 Excavator Fan Motor High Strength

Heavy Equipment Parts E325C 179-9778 Excavator Fan Motor

Fan motor FOR Excavator ,Chinese Professional excavator parts supplier, High quality, Long-life, Unbeatable price for E325C Hydraulic excavator ,Hydraulic spare parts , Spare parts

179-9778 fan motor, 24417, E325C fan hydraulic motor , hydraulic fan piston pump

Fan motor

Descrition about E325C 179-9778 Excavator Fan Motor

Appliion	Excavator
Part name	Fan Motor
Material	Steel
Model	E325C
MOQ	1PC
Warranty	6 months
Payment term	Western Union&T/T&Paypal& pay
Part NO.	179-9778
Delivery Time	Within 2 days after receiving the payment
Brand	Belparts
Packing	Standard shipping package

Pictures Show :

Part NO. Show (Number on alog scheme: 9)

Impormation:

Note: Ensure that the Safety Information, warnings, and instructions are read and understood before operation or maintenance procedures are performed.Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must also be performed.Note: For engines that are equipped with AIRSEP® engine air cleaners, the turbocharger should be inspected every 1000 service hours.When Required

Belt - Inspect/Adjust/Replace
Battery - Recycle
Battery or Battery Cable - Disconnect
Engine Oil Level Gauge - Calibrate
Fuel System - Prime

Daily
Cooling System Coolant Level - Check
Engine Air Cleaner Service Indior - Inspect
Engine Oil Level - Check
Fuel System Water Separator - Drain
Marine Transmission Oil Level - Check
Walk-Around Inspection

Every 1900 L (500 US gal) of Fuel or 50 Service Hours
Aftercooler Drain Plug - Inspect
Engine Air Cleaner Element (Foam) - Clean/Replace
Zinc Rods - Inspect/Replace
Initial 9000 L (2400 US gal) of Fuel or 250 Service Hours or 1 Year
Engine Valve Lash - Inspect/Adjust
Every 9000 L (2400 US gal) of Fuel or 250 Service Hours or Yearly
Auxiliary Water Pump - Inspect
Belt - Inspect/Adjust/Replace

Battery Electrolyte Level - Check
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Air Cleaner Element - Clean/Replace
Engine Crank Breather - Clean
Engine Oil Sample - Obtain
Engine Oil and Filter - Change

Engine Protective Devices - Check
Exhaust Restrictor - Inspect/Adjust
Fuel System Primary Filter/Water Separator Element - Replace
Fuel System Secondary Filter - Replace
Fuel Tank Water and Sediment - Drain
Hoses and Clamps - Inspect/Replace
Magnetic Pickups - Clean/Inspect
Oil Fumes Filter - Replace

Sea Water Strainer - Clean/Inspect
Every 36 000 L (9000 US gal) of Fuel or 1000 Service Hours or 2 Years
Aftercooler Core - Clean/Test
Cooling System Coolant (DEAC) - Change
Cooling System Water Temperature Regulator - Replace
Engine - Clean

Governor Housing - Drain
Marine Transmission Oil Cooler - Clean/Inspect
PCV Valve - Inspect
Every 72 000 L (19 000 US gal) of Fuel or 2000 Service Hours
Alternator - Inspect

Crankshaft Vibration Damper - Inspect
Engine Mounts - Inspect
Engine Valve Lash - Inspect/Adjust
Fuel Injection Nozzles - Test/Exchange
Fuel Ratio Control - Inspect/Adjust
Heat Exchanger - Inspect

Starting Motor - Inspect
Turbocharger - Inspect
Every 108 000 L (28 500 US gal) of Fuel or 3000 Service Hours or 2 Years
Cooling System Coolant Extender (ELC) - Add
Water Pump - Inspect
Every 114 000 L (30 000 US gal) of Fuel

Overhaul Considerations
Every 216 000 L (57 000 US gal) of Fuel or 6000 Service Hours or 4 Years
Cooling System Coolant (ELC) - Change

Our company can supply spare parts

Excavator Parts Doosan/Daewoo DH420 travel gearbox DH420-7 planetary gearbox

1. Hydraulic parts: hydraulic pump, main control valve, hydraulic cylinder, final drive, travel motor, swing motor etc.

2. Engine parts: engine ass’y, piston, piston ring, cylinder block, cylinder head, crankshaft, turbocharger, fuel injection pump, starting motor and alternator etc.

CyFor Linder Head, CyFor Linder Block, Turbocharger, Piston, Piston Ring, Metal, Crankshaft, Oil Pump, Fuel injection Pump, Water Pump, Alternator, Starting Motor

3. Undercarriage part: Track roller, Carrier roller, Track Link, Track shoe, Sprocket, Idler and Idler cushion ,coil adjuster,rubber track,etc.

4. Cab parts: operator’s cab assy, wiring harness, monitor, controller, seat, door etc.

5. Hydraulic spare parts: Main Valve, Main Pump, Solenoid Valve, Boom/Arm/Bucket CyFor Linder, Final Drive, Travel Motor, Swing Machinery, Swing Motor

Our Services

♦ 100% quality assurance, develop and manufacture follow original ones;
♦ Reasonable stock and timely delivery;

♦ Quick response within 24 hours ;
♦ Long-term strong and steady supplying ability;
♦ One-to-one products factory.Ensure the best quality;

♦ The first-class logistics & Ensure that your goods arrived safely;

♦ Goods will Be packed safe & carefully;

♦ Excellent After-sales service.Track usage.Positive feedback response;

♦ Establish inquiry library for you, we are your professional sourcing consultant.

FAQ

Q1: How does your factory do refarding quality control? And how long is the quality guarantee?
A1: 12 month warranty. And all our products are 100% inspected and tested before selling.

Q2: When can I get the price?
A1: Usually we quote within 24 hours after your inquiry.

Q3: How long is the deliver time?
A3. It usually takes about 3 - 5 working days for sample order and 10 - 25 days for big order.

Q4:What is the price of shipping?
A4: Depending upon the port of delivery, prices varies.

Q5. Could you accept OEM?
A5. Yes, Our company are available for Retail & Wholesale & OEM & ODM.

Product Tags:


*From:	Your email address is incorrect!
*To:	GZ Yuexiang Engineering Machinery Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!